Rubber & silicone sheets
Check thickness, width, length, surface, hardness, reinforcement and roll or sheet condition against the approved order reference.
START WITH THE SPECIFICATION
Quality starts before the first sheet or part is produced
A rubber product can look acceptable and still be wrong for your application. Before production, we align the drawing, material, hardness, dimensions, surface, color and any compliance requirement that matters to your order.
Send the drawing, application conditions and acceptance points you care about. We will use them to define a practical inspection reference for the order.
⌖
Drawing & dimensions
Critical dimensions, tolerances, thickness, width and length are agreed against your drawing or approved sample.
◫
Material & hardness
Material type and Shore hardness are selected around temperature, media, wear, sealing and flexibility requirements.
✓
Surface & compliance
Color, texture, reinforcement, finish and market-specific documentation are confirmed where applicable.
ORDER-STAGE QUALITY CONTROL
Checks follow the order from requirement review to shipment release
Not every rubber product needs the same test. The inspection route should follow the material, structure, application and risk points confirmed for your project.
01 · REVIEW
Confirm the reference
Drawing revision, material, hardness, dimensions, finish, quantity and packaging are reviewed before production.
02 · INCOMING
Check incoming material
Material identity and the project requirements are checked before the material moves into the production route.
03 · FIRST ARTICLE
Verify the first output
Key dimensions, appearance and agreed functional points can be reviewed before the full run continues.
04 · IN PROCESS
Monitor production
Thickness, dimensions, hardness, surface and other selected points are checked during production as applicable.
05 · RELEASE
Inspect before packing
Finished products and packing details are checked against the approved order information before shipment release.
PRODUCT-SPECIFIC INSPECTION
Different rubber products need different inspection priorities
We focus the inspection on the points that can affect fit, sealing, wear, handling and repeat ordering—not on a generic checklist that ignores the product.
TESTING EQUIPMENT
Use the right test for the property that matters
A single test cannot prove that a rubber product is suitable. The equipment below supports different questions about hardness, strength, wear, deformation and size.
REVIEWABLE EVIDENCE
Ask for the records that support your purchasing decision
Tell us which quality documents your team needs before quotation. Availability and format depend on the material, product, test standard and order requirements.
Approved drawing or sample
Keeps dimensions, material, hardness, appearance and revision under one agreed reference.
Inspection record
Selected measurements or inspection points can be recorded when agreed for the order.
Material or test documentation
Relevant documentation can be discussed according to the compound, standard and application.
Packing and shipment evidence
Labels, quantity, packing method and shipment photos can be aligned with the purchase order.
COMPLIANCE BY APPLICATION
Confirm the required standard before material selection
Compliance is not a blanket claim for every rubber product. Tell us the destination market, application and required standard so the material and supporting documentation can be checked for your project.
ISO 9001
RoHS
REACH
FDA-related
EC 1935/2004
WRAS
EN 45545
Halogen-free
Phthalate-freeImportant: confirm the exact material grade, test method, report scope and document validity before placing an order. A certificate shown on the website does not automatically apply to every compound, thickness, color or finished product.
QUALITY ISSUE REVIEW
If a problem appears, start with evidence from the actual order
A clear review is faster when the product, batch, drawing and failure condition can be connected. Send the details below so the relevant team can investigate the issue against the order reference.
Identify the item
Share the purchase order, product name, drawing revision, quantity and batch or label information available.
Show the problem
Provide clear photos, measurements, video and a description of how and where the product was used.
Review the cause
The product information and evidence are compared with the approved order requirements and production record.
Agree the action
Containment, replacement, rework or another practical action is discussed according to the verified cause and order terms.
BUYER QUESTIONS
Questions to settle before production
How are dimensional tolerances confirmed?
Send your drawing or required dimensions and identify the critical points. The practical tolerance depends on the rubber material, hardness, manufacturing method, product geometry and size, so it should be confirmed before quotation and sampling.
Can you test Shore hardness?
Hardness testing is available for applicable rubber and silicone products. Specify the Shore scale, target range and test reference required for your project.
Which tests are needed for my rubber product?
The answer depends on how the product will be used. Temperature, media, abrasion, compression, sealing, tensile load and regulatory requirements determine which properties should be checked.
Can I approve a sample before mass production?
Sampling can be discussed for custom projects. Use the sample to confirm material, dimensions, hardness, surface, color and fit before the production reference is released.
Can you provide inspection or test documents?
Selected records and supporting documents can be discussed where applicable. Confirm the document name, test method, acceptance criteria and required format before the order is placed.
Do all certificates shown apply to every product?
No. Applicability depends on the material grade, formulation, thickness, color, production route, test scope and destination market. Ask us to verify the exact requirement for your product.
What should I send when reporting a quality problem?
Send the order number, product label or batch information, drawing or sample reference, affected quantity, clear photos, measurements and application conditions. This gives the investigation a reliable starting point.
Plan Your Quality Checks Before Production
Send the material, dimensions, hardness, application conditions and documents you need. We will help you define the checks for your project.
